OK3568-C Single Board Computer
terface | spec. | |
Display | HDMI 2.0 | resolution up to 1080p@120Hz or 4096x2304@60Hz; |
eDP | supports eDP 1.3, resolution up to 2560x1600@60Hz; | |
LVDS | single-channel output, resolution up to 1280x800; | |
LCD | RGB888 up to 1280x800; multiplexed with SPI0, SPI2, UART3, UART4, UART5 and UART7. | |
MIPI-DSI1 | single-channel output, up to 1920x1080@60Hz; | |
Camera | MIPI-CSI, tested and recommended model OV13850. | |
Audio | 1x stereo headphone output; 1x 1.3W class D amplifier output; 1x MIC input. | |
TF Card | For storage expanding and OS firmware flashing. | |
Ethernet | 2x 10/100/1000Mbps auto-negotiation, RJ45 connector. | |
4G/5G modem | M.2 Key-B, contains USB 3.0/2.0 for 4G/5G module expanding; | |
Wi-Fi&BT | On-board AW-CM358SM, 2.4G/5G dual-band Wi-Fi, BT5.0. | |
USB 2.0 | 2x USB 2.0 Host, Type-A | |
USB 3.0 | 1x USB 3.0 Host, Type-A. | |
USB 2.0 OTG | contained in USB 3.0, can be used as slave mode for OS iamge flashing and ADB debugging. | |
PCIe 2.1 | Standard PCIe x1 socket; multiplexed with SATA | |
PCIe 3.0 | Standard PCIe x4 socket, can be configured as 2 PCIe x1. | |
UART | 3x 3.3V TTL level, by pin headers with pitch of 2.54mm. | |
CAN | 2x CAN2.0; with isolation and ESD protection. | |
SPI | 2x 3.3V TTL, by pin headers with pitch of 2.54mm | |
I2C | 1x 3.3V TTL level, by pin headers with pitch of 2.54mm. | |
RTC | CR2032 | |
Buttons | 8: reset, power on/off, OTG programming, Maskrom, VOL+, VOL-, HOME, ESC. | |
QSPI | on-board 32MB QSPI Nor Flash. | |
Debug | converted by USB, Type-C connector that convenient for laptop users. | |
Power input | DC 12V |